Multi - Functional Red Color Wall Metal Detector MD120 Battery Type
1x9 Volts 6L . R61
Care
Keep the measuring tool clean and dry at all times to ensureproper
and safe working.
- Do not immerse the tool in water or other fluids.
- Wipe away debris or contamination with a dry,soft cloth.Do notuse
cleaning agents or solvents.
- ln order not to affect the measuring function,decalsstickers
orname plates,especiall metal ones,may not be attached in thesensor
area 13 on the front or back side of the measuring tool.
- Do not remove the contact pads 12 on the back.
- Do not open the instrument by yourself. Store and transport
themeasuring tool only in the supplied soft package.
In case of repairs,send in the tool packed in its soft package.
Warranty
Check the measuring tool each time before use. ln case of visible
damage or loose components inside themeasuring tool, safe function
can no longer be ensured. When 
flashes on the display,send the tool in the providedsoft package to
the dealer or our company.
The instrument comes with a one-year warranty. This
warrantyeffective premise is:according to the company's
operatinginstructions for correct operation,processing,ceanin
andmaintenance of the tool,and the tool is maintained good
technical condition.This means that in the tool can be used inthe
company's original components and spare parts. This warranty is
provided in the tool during the whole life expectancyof the
defective parts of the repaired or replaced free of charge.If the
component due to normal wear and in need of repair ofreplacement,is
not in the warranty range. All illustrations ,descriptions and
technical specificationsmay be subject to change without prior
notice.
Technical Data
| Multi-functional wall detector MD120 |
| Maximum probing depth |
| Magnetic metal 120mm |
| Non-Magnetic metal 80mm |
| Charged wire 11O 230volts(in the pass through) 50mm |
| Wood 38mm |
| Switch off instrument with inactivity after 5mins |
| Operation temperature -10C~+ 509C |
| Storage temperature -20C~+70C |
| Battery type 1x9 volts 6L .R61 |
| Operation time about 5 hours |
| Weight conform to EPTA-Procedure 01/2003 270g |
| Protection class IP54 |
Safe Instructions
Read and pay attention to all of the instructions.Properly keep the
manual.
Use of the instrument
The detector could probing the metals(magnetic metal and
non-magnetic metal), wood and charged wire.
Limits of use
- Use the instrument without reading the manual.
- Use the instrument outside the specified range.
- Disable the security system.Take out a note or a danger sign.
- Use tool(such as screwdriver) to open the instrument.
- Update or modificate the instrument.
- Use accessory from other factory without approval.
- Use the instrument in explosive conditions(such as flammable
liquid,flammable gas or combustible dust)
- Repairing the instrument by yourself or laypeople.
- Don't prevent the moisture penetration against the instrument.
- Let the instrument be exposed to direct sunlight.
- Let the instrument be subject to large variations in temperature.
- Use or operation of transmitting systems,such as WL .AN,UMTS
,radar,transmitter masts or microwaves,in the close proximity can
influence the measuring function
